SkyGloss FUSION

Build the clearcoat back. Don't polish it away.

Every machine polish fixes dull paint by removing clearcoat. FUSION does the opposite — it fuses a new layer of OEM-grade clearcoat into the paint you already have, so the car keeps its original finish and gains thickness instead of losing it.

Updated

The problem with polishing

Clearcoat is the factory protection on your paint. It is also finite. Swirl marks, wash marring and oxidation are all damage to that layer, and the standard fix — machine polishing — works by cutting it back to a level surface.

That is the right answer when there is clearcoat to spare. On a car that has been polished before, or one that has spent years in the sun, there may not be. And every polish takes more of it, permanently.

FUSION is the other direction. It fuses high-grade OEM clearcoat into the existing paint system, rebuilding thickness, depth and UV protection rather than trading them away for gloss.

Where it comes from

SkyGloss is headquartered in Ede, the Netherlands, where the technology is developed and where its flagship shop operates. It is used across Europe and beyond — SkyGloss describes a network spanning more than forty countries.

Emad brought it to the eastern United States first. SkyGloss's own shop in Arizona came before it. This was the first independent American shop to apply it, and it is where other US installers are pointed when they ask about adopting it.

What it is not

Not a ceramic coating

A coating sits on top of your clearcoat. FUSION adds to the clearcoat itself. On most cars the right answer is FUSION first, coating after.

Not paint protection film

Film is a physical layer over the paint, and it is the right answer for impact protection. FUSION works within the paint system and does not stop stone chips.

Not for every car

It depends on how much clearcoat is left. If there is not enough to work with, we will tell you — a process that needs material to build on cannot invent it.

Questions

What is clearcoat FUSION?

A process that fuses a new layer of OEM-grade clearcoat into your existing paint. It builds the clearcoat back up instead of polishing the original thinner.

How is it different from paint correction?

Paint correction removes clearcoat to level the surface. FUSION adds clearcoat. They answer the same complaint — dull, swirled paint — from opposite directions, and on thin or aged clearcoat only one of them is available.

Is FUSION a ceramic coating?

No. A coating sits on top of the clearcoat. FUSION adds to the clearcoat itself. The two are often used together, in that order.

Is FUSION paint protection film?

No. Film is a physical layer applied over the paint. FUSION works within the paint system and does not stop stone chips.

Where does SkyGloss come from?

SkyGloss is headquartered in Ede, the Netherlands, where the technology is developed and where its flagship shop operates.

Can every car take FUSION?

No. It depends on how much clearcoat is left. Inspection comes first, and if there is not enough to work with, we will say so rather than sell you the process.

Start with the paint you have

Every FUSION job begins with a paint health check — how much clearcoat is left, whether any panel has been repainted, and what the paint actually needs. If FUSION is not the right answer for your car, we will say so.